 |
FEATURES
Smm L. Low leakage current, accurate and reliablity. Suit for use in high stable circuits.
 |
CASE SIZE TABLE
| ØD |
4 |
5 |
6,3 |
8 |
| P |
1,5 |
2,0 |
2,5 |
3,5 |
| Ød |
0,45 |
0,45 |
0,45 |
0,45 |
| α |
1,5 |
| β |
0,5 |
SPECIFICATIONS
| Item |
Performance Characteristics |
| Operating Temperature Range |
-40 to +105°C |
| Rated Working Voltage Range |
4 to 50V |
| Nominal Capacitance Range |
0,1 to 100μF |
| Capacitance Tolerance |
±20% (120Hz, +20°C) |
| Leakage Current |
I ≤ 0,002 CV or 0,8(μA) whichever is greater measured after 2minutes application of with rated working voltage at +20°C |
Dissipation Factor
tan δ (120Hz, +20°C) |
| Working Voltage (V) |
4 |
6,3 |
10 |
16 |
25 |
35 |
50 |
| tan δ (max) |
0,35 |
0,24 |
0,20 |
0,16 |
0,14 |
0,12 |
0,10 |
|
| Low Temperature Characteristics |
Impedance ratio max. at 120Hz
| Working Voltage (V) |
4 |
6,3 |
10 |
16 |
25 |
35 |
50 |
| Z-25°C / Z+20°C |
7 |
4 |
3 |
2 |
2 |
2 |
2 |
| Z-40°C / Z+20°C |
15 |
10 |
8 |
6 |
4 |
3 |
3 |
|
| High Temperature Loading |
| Test conditions |
Post test requirements at +20°C |
| Duration: 1000 hours |
Leakage current: ≤ Initial specified value |
| Ambient temp.: +105°C |
Cap. change: within ±20% of initial measured value |
| Applied voltage: Rated DC working voltage |
tan δ: ≤ 200% of initial specified value |
|
| Shelf Life |
| Test conditions |
Post test requirements at +20°C |
| Duration: 500 hours |
Leakage current: ≤ Initial specified value |
| Ambient temp.: +105°C |
Cap. change: within ±20% of initial measured value |
| Applied voltage: (None) |
tan δ: ≤ 200% of initial specified value |
|
STANDARD RATINGS
| Voltage (Code) |
4V |
6,3V |
10V |
16V |
| Cap, (μF) |
Case Size
ØDxL (mm) |
Ripple |
Case Size
ØDxL (mm) |
Ripple |
Case Size
ØDxL (mm) |
Ripple |
Case Size
ØDxL (mm) |
Ripple |
| 10 |
|
|
|
|
|
|
4x5 |
15 |
| 22 |
|
|
4x5 |
19 |
5x5 |
22 |
5x5 |
25 |
| 33 |
5x5 |
19 |
5x5 |
25 |
5x5 |
27 |
6,3x5 |
30 |
| 47 |
5x5 |
22 |
5x5 |
30 |
6,3x5 |
34 |
6,3x5 |
38 |
| 100 |
6,3x5 |
37 |
6,3x5 |
46 |
8x5 |
86 |
8x5 |
92 |
| Maximum Allowable Ripple Current (mA rms) at 105°C 120Hz |
| Voltage (Code) |
25V |
35V |
50V |
| Cap, (μF) |
Case Size
ØDxL (mm) |
Ripple |
Case Size
ØDxL (mm) |
Ripple |
Case Size
ØDxL (mm) |
Ripple |
| 0,1 |
|
|
|
|
4x5 |
0,7 |
| 0,22 |
|
|
|
|
4x5 |
1,3 |
| 0,33 |
|
|
|
|
4x5 |
1,9 |
| 0,47 |
|
|
|
|
4x5 |
2,7 |
| 1 |
|
|
|
|
4x5 |
5,5 |
| 2,2 |
|
|
|
|
4x5 |
9 |
| 3,3 |
|
|
|
|
5x5 |
12 |
| 4,7 |
4x5 |
11 |
4x5 |
12 |
5x5 |
13 |
| 10 |
5x5 |
18 |
5x5 |
20 |
6,3x5 |
22 |
| 22 |
6,3x5 |
28 |
6,3x5 |
31 |
|
|
| 33 |
6,3x5 |
34 |
|
|
|
|
| 47 |
6,3x5 |
46 |
|
|
|
|
| 100 |
8x5 |
89 |
|
|
|
|
| Maximum Allowable Ripple Current (mA rms) at 105°C 120Hz |
RIPPLE CURRENT MULTIPLIER
Frequency Coefficient (Hz)
| Cap (μF) |
50 |
120 |
300 |
1k |
10k~ |
| ≤47 |
0,75 |
1,00 |
1,35 |
1,57 |
2,00 |
| 56-100 |
0,80 |
1,00 |
1,23 |
1,34 |
1,50 |
TEMPERATURE COEFFICIENT
Frequency Coefficient (Hz)
| Temperature |
-55 |
60 |
70 |
85 |
105 |
| Factor |
2,23 |
2,17 |
2,00 |
1,75 |
1,00 |
|
