Our company makes according to sketches or drawings of clients power cords with the unassembled plugs filled in on a cable in the course of production. It is possible to manufacture a variety of combinations of connectors, cable sizes, insulation colors. At the same time, there is often a requirement of the factory to the minimum amount of start-up, which must be agreed with our managers. Some of the most popular monitor lizards we try to maintain in our warehouse.
Examples produced by the factory, see options below:
 
 
When ordering a power cord is required to indicate the existence of a bushing, the dimensions (L1, D, F, G), and the cross section of the cable (3x1,5 sq mm), tail length L, the size of L2, the length remove the overall sheath L3, length L4 Stripping, the need for tinning the stripped ends and the presence of the tip.
t is also possible to install the connector on the free ends of the cable, for example, with pitch 3.96 mm:
|
