Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Connectors / Modular Jack / RJ45 With Integrated Magnetics /

SK02-111015NL

SK02-111015NL / RJ45 With Integrated Magnetics / Modular Jack / Connectors

Specifications:

Electrical
Current rating: 1,5A
Voltage rating: 125V AC
Insulation resistance: >1000MOm
Withstanding voltage: AC 1000V RMS 50Hz or 60Hz 1Min
Contact resistance: <30mOm
Plastic Point Type:
       Type A: Gross Point
       Type B: Round Point

Working temperature: -40°C ... +70°C

Mechanical
Mating Force: 5-25N
Retention Strength: >76N
Durability: >750 times

Material
Housing: PA66 or PBT Filled with Fiberglass
Insert: PBT filled with Fiberglass
Shielding: 0,2mm Thickness Cooper Alloy with Tin Plated
Contact: Phosphor Bronze, Gold Plated over Nickel

Product Description: SINGLE PORT RJ45, TAB DOWN, FILTERED, WITH LED

1. SCOPE
1.1 Content
1.1.1 This specification covers performance, tests and quality requirements for: SINGLE PORT RJ45, TAB DOWN, FILTERED, WITH LED

2. REQUIREMENTS
2.1 Design and Construction
2.1.1 Product shall be of design, construction and physical dimensions specified on applicable product drawing.

2.2 Materials and Finish
2.2.1 Contact:
2.2.1.1 RJ Contact: Phosphor Bronze, Thickness=0.35mm
   Finish : ( a ) Contact Area : 6µ"min. Gold
  ( b ) Solder tail Area : 60µ"min. Tin
  ( c ) Underplating : 50µ"min. Nickel over all
2.2.1.2 Joint Contact : Brass, Thickness=0.35mm
Finish : 60µ"min. Tin
2.2.2 Plastic Part:
2.2.2.1 Housing: Thermoplastic, PBT, Black
2.2.2.2 Insert: Thermoplastic, PBT, Black
2.2.3 Shell
2.2.3.1 Shell: Copper Alloy- H65Y Cu/Ep.Ni, Thickness=0.20mm
2.2.3.2 Shell Plated: Copper Alloy with Ni Plated.

2.3 LED Lamp or NON LED Lamp
2.3.1 Lens Color: Transparent with color
2.3.2 Emitted Color: Green
2.3.3 Wave Length: Green 573nm

3. Operating and Storage Temperature
3.1 Operating Temperature : 0°C to +70°C
3.2 Non-Operating Temperature : -40°C to +85°C

4 .Ratings
4.1 Voltage rating: 125 VAC
4.2 Current rating: 1.5 A

5. Packaging and Packing
All parts shall be packaged and packed to protect against physical damage, corrosion and deterioration during shipment and storage.

6. Profile of Wave Solder
6.1 SUGGESTED WAVE SOLDER CURVE
   (1)Tip temperature:250±10°C
   (2)Tip temperature time:5 sec max
   * The melting point of Tin:183

SK02-111015NL / RJ45 With Integrated Magnetics / Modular Jack / Connectors