Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Corrugated Tubing Fittings /

Quick-Fit Watertight Corrugated Tubing Fittings

Quick-Fit Watertight Corrugated Tubing Fittings
Quick-Fit Watertight Corrugated Tubing Fittings

Thread Type: G(PF)and NPT.

Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts.
Weather-resistant EPDM rubbers for B.D parts.
Our black fittings are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

IP Protection: IP68.

Working Temp.: - 40°C to 105°C. Short-Term to 160°C.

Application: The quick-fit watertight polyamide quick-fit fittings contain a very special compression design with a clamp, sealing insert and a compressing nut to provide a fast & safe connection with tubings and to get the results of watertight & pullout strength the cable protection system. They are widely used for outdoor / indoor applications on any machines, devices and equipments with the specific waterproof demands.

* The Washer (Gasket) and Lock Nut are all included in each Watertight Fitting, this saves additional ordering work and storage spaces.
* Contact us for specially ordering AVC Water / Oil tight Tubing Fittings with NBR or Viton rubber material for specific oil resistant applications. (MOQ is required).


Thread Cat.No. Max.
Joint
F1
mm
Accommodated
AVC Tubings
Thread
O. D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
Light
Grey
RAL
7035
Silver
Grey
RAL
7001
NYLON HDPE
G(PF) 1/4 N-FQW13-10 B G SG 10 (NGN-07B) 1/4" (NFE02B) 1/4" 13.157 13.2-13.4 9 50
3/8 N-FQW17-13 B G SG 13 (NGN-10B) 5/16" (NFE025B) 5/16" 16.662 16.7-16.9 10 50
1/2 N-FQW21-13 B G SG 13 (NGN-10B) 5/16" (NFE-025B) 5/16" 20.955 21-21.2 10 50
N-FQW21-15 B G SG 16 (NGN-12B) 3/8" - - 20.955 21-21.2 10 50
N-FQW21-18 B G SG 18.3 (NGN-14B) 3/8" (NFE03B) 3/8" 20.955 21-21.2 10 50
N-FQW21-21 B G SG 22 (NGN-17B) 1/2" (NFE04B) 1/2" 20.955 21-21.2 10 50
3/4 N-FQW26-15 B G SG 16 (NGN-12B) 3/8" - - 26.441 26.5-26.8 12 50
N-FQW26-18 B G SG 18.3 (NGN-14B) 3/8" (NFE03B) 3/8" 26.441 26.5-26.8 12 50
N-FQW26-21 B G SG 22 (NGN-17B) 1/2" (NFE04B) 1/2" 26.441 26.5-26.8 12.5 50
N-FQW26-26 B G SG 26.5 (NGN-22B) 3/4" (NFE06B) 3/4" 26.441 26.5-26.8 15 50
N-FQW26-28 B G SG 28.5 (NGN-23B) 3/4" - - 26.441 26.5-26.8 15 50
1 N-FQW33-21 B G SG 22 (NGN-17B) 1/2" (NFE048) 1/2" 33.249 33.3-33.6 12 10
N-FQW33-34 B G SG 34.5 (NGN-28B) 1" (NFE08B) 1" 33.249 33.3-33.6 15 10
1 1/4 N-FQW42-42 B G SG 43 (NGN-36B) 1 1/4" (NFE10B) 1 1/4" 41.91 42-42.3 20 10
 
NPT 1/2 N-NQW21-15 B G SG 16 (NGN-12B) 3/8" - - 21.223 - 13 50
N-NQW21-18 B G SG 18.3 (NGN-14B) 3/8" (NFE03B) 3/8" 21.223 - 13 50
NPT 3/4 N-NQW26-21 B G SG 22 (NGN-17B) 1/2" (NFE04B) 1/2" 26.568 - 15 50