Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Corrugated Tubing Fittings /

90° Elbow Quick-Fit Watertight Corrugated Tubing Fittings

90° Elbow Quick-Fit Watertight Corrugated Tubing Fittings
90° Elbow Quick-Fit Watertight Corrugated Tubing Fittings

Thread Type: Metric, PG and G (PF).

Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts.
Weather-resistant EPDM rubbers for B.D parts.
Our black fittings are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

IP Protection: IP68.

Working Temp.: - 40°C to 105°C. Short-Term to 160°C.

Application: The elbow tubing fitting is a best 90° connector for the housing panel and conduit, that is commonly used when the conduit system is run in parallel to the housing wall and protect conduit from sharp bending. In addition, this fitting is specially constructed with a unique clamping nut, claw and sealing insert to provide a quick-fit tubing connection accompanied with the watertight & pullout strength effects to be the best balanced performer for cable protection system which is widely used in any machines, devices and equipments, that waterproof is required.

* The Washer (Gasket) and Lock Nut are all included in each Watertight Fitting, this saves additional ordering work and storage spaces.
* Contact us for specially ordering AVC Water / Oil tight Tubing Fittings with NBR or Viton rubber material for specific oil resistant applications. (MOQ is required).


Thread Cat.No. Max.
Joint
F1
mm
Accommodated
AVC Tubings
Thread
O. D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
Light
Grey
RAL
7035
Silver
Grey
RAL
7001
NYLON HDPE
M16x1.5 N-MQW16-E-13-ST B G SG 13 (NGN-10B) 5/16" (NFE-025B) 5/16" 16 16-16.3 12 10
N-MQW16-E-15 B G SG 16 (NGN-12B) 3/8" - - 16 16-16.3 15 10
N-MQW16-E-18 B G SG 18.3 (NGN-14B) 3/8" (NFE-03B) 3/8" 16 16-16.3 15 10
M20x1.5 N-MQW20-E-15 B G SG 16 (NGN-12B) 3/8" - - 20 20-20.3 15 10
N-MQW20-E-18 B G SG 18.3 (NGN-14B) 3/8" (NFE-03B) 3/8" 20 20-20.3 15 10
N-MQW20-E-21 B G SG 22 (NGN-17B) 1/2" (NFE-04B) 1/2" 20 20-20.3 15 10
M25x1.5 N-MQW25-E-26 B G SG 26.5 (NGN-22B) 3/4" (NFE-06B) 3/4" 25 25-25.4 15 10
N-MQW25-E-28 B G SG 28.5 (NGN-23B) 3/4" - - 25 25-25.4 15 10
M32x1.5 N-MQW32-E-34 B G SG 34.5 (NGN-28B) 1" (NFE-08B) 1" 32 32-32.4 15 10
M40x1.5 N-MQW40-E-42 B G SG 43 (NGN-36B) 1 1/4" (NFE-10B) 1 1/4" 40 40-40.4 20 10
 
PG16 N-PQW16-E-15 B G SG 16 (NGN-12B) 3/8" - - 22.5 22.5-22.8 12 10
N-PQW16-E-18 B G SG 18.3 (NGN-14B) 3/8" (NFE-03B) 3/8" 22.5 22.5-22.8 12 10
 
G(PF) 1/2 N-FQW21-E-15 B G SG 16 (NGN-12B) 3/8" - - 20.955 21-21.2 12 10
N-FQW21-E-18 B G SG 18.3 (NGN-14B) 3/8" (NFE-03B) 3/8" 20.955 21-21.2 12 10
N-FQW21-E-21 B G SG 22 (NGN-17B) 1/2" (NFE-04B) 1/2" 20.955 21-21.2 15 10
3/4 N-FQW26-E-26 B G SG 26.5 (NGN-22B) 3/4" (NFE-06B) 3/4" 26.441 26.5-26.8 15 10
N-FQW26-E-28 B G SG 28.5 (NGN-23B) 3/4" - - 26.441 26.5-26.8 15 10
1 N-FQW33-E-34 B G SG 34.5 (NGN-28B) 1" (NFE-08B) 1" 33.249 33.3-33.6 15 10
1 1/4 N-FQW42-E-42 B G SG 43 (NGN-36B) 1 1/4" (NFE-10B) 1 1/4" 41.91 42-42.3 20 10