Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Metal Conduits & Fittings /

90° Elbow PA Fittings For Convoluted Metal Conduits

90° Elbow PA Fittings For Convoluted Metal Conduits
90° Elbow PA Fittings For Convoluted Metal Conduits

Thread Type: Metric, PG and G(PF).

Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.E.F parts.
Our black fittings are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

Working Temp.: - 40°C to 105°C. Short-Term to 160°C.

Application: When the conduits should be routed in parallel to the housing wall, this Elbow Fitting is an ideal connector to avoid the conduits bending to a sharp angle. With special ferrule designs, the refined fittings from AVC's elbow polyamide connectors provide strong pull-out strength and anti-vibration functions. They have been proven their good performance in oil and rust-proof over the years, to offer the best cost & performance efficient for the cable protection systems.

* The Lock Nut is included in each Fitting, this saves additional ordering work and storage locations.


Thread Cat.No. Max.
Joint
F1
mm
Accommodated
AVC Conduits
Thread
O. D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
Light
Grey
RAL
7035
Silver
Grey
RAL
7001
M16x1.5 S-MGS16-E-15 B G SG 16 (S-J02.5B) 5/16" 16 16-16.3 15 10
S-MGS16-E-18 B G SG 18.3 (S-J03B) 3/8" 16 16-16.3 15 10
M20x1.5 S-MGS20-E-15 B G SG 16 (S-J02.5B) 5/16" 20 20-20.3 15 10
S-MGS20-E-18 B G SG 18.3 (S-J03B) 3/8" 20 20-20.3 15 10
S-MGS20-E-21 B G SG 22 (S-J04B, S-NN04B) 1/2" 20 20-20.3 15 10
M25x1.5 S-MGS25-E-26 B G SG 26.5 (S-J06B, S-NN06B) 5/16" 25 25-25.4 15 10
M32x1.5 S-MGS32-E-34 B G SG 34.5 (S-J08B, S- NN08B) 3/8" 32 32-32.4 15 10
M40x1.5 S-MGS40-E-42 B G SG 43 (S-J10B) 1/2" 40 40-40.4 20 10
 
PG16 S-PGS16-E-15 B G SG 16 (S-J02.5B) 3/4" 22.5 22.5-22.8 12 10
S-PGS16-E-18 B G SG 18.3 (S-J03B) 1/2" 22.5 22.5-22.8 12 10
 
G(PF) 1/2 S-FGS21-E-15 B G SG 16 (S-J02.5B) 5/16" 20.955 21-21.2 12 10
S-FGS21-E-18 B G SG 18.3 (S-J03B) 3/8" 20.955 21-21.2 12 10
S-FGS21-E-21 B G SG 22 (S-J04B, S- NN04B) 1/2" 20.955 21-21.2 15 10
3/4 S-FGS26-E-26 B G SG 26.5 (S-J06B, S- NN06B) 5/16" 26.441 26.5-26.8 15 10
1 S-FGS33-E-34 B G SG 34.5 (S-J08B, S- NN08B) 3/8" 33.249 33.3-33.6 15 10
1 1/4 S-FGS42-E-42 B G SG 43 (S-J10B) 1/2" 41.91 42-42.3 20 10