Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Metal Cable Glands /

EMC Brass Cable Glands

EMC Brass Cable Glands
EMC Brass Cable Glands

Thread Type: G (PF) and NPT.

Material Data: Brass nickel-plated (J IS C3604 / DIN CuZn39Pb3 / ASTM C37800) for A.C.C1.F parts; Nylon PA 66 for E part.
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications)

IP Protection: IP68 - 5 bar.

Working Temp.: -40°C to 105°C. Short-Term to 160°C.

Application: AVC EMC cable gland looked like a normal gland, but with its metal Intermediate Contact Disc (C1) which can contact the screen of shielded cable, helps to achieve an optimum low-resistance EMC bonding and to be attached to withstand electromagnetic interference. Due to this simple earthing disc, the gland can provides continuous EMC protection and the cable range is the same without change when comparing with a normal gland. Besides, the high quality nickel-plated brass in combination with AVC's unique sealing & clamping units can provide the excellent mechanical properties (anti corrosion / chemical & weather resistance / flame protection / high impact durability) and the strong strain relief & watertight performance over the entire cable range to be the specific EMC-safe cable entry for outdoor / indoor applications.

* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.


Seal
Holes
Thread Cat.No. Cable
Range
mmØ
Thread
O.D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Spanner
Size
A/F
mm
Std.
Pkg.
pcs
A
Type
G(PF) 1/4 EMC-FBA13-05 5.3-3 13.157 13.2-13.4 8 17/17 10
EMC-FBA13-08 7.8-4.5 13.157 13.2-13.4 8 17/17 10
3/8 EMC-FBA17-06 7-4 16.662 16.7-16.9 9 22/22 10
EMC-FBA17-10 10-6 16.662 16.7-16.9 9 22/22 10
1/2 EMC-FBA21-10 11-7 20.955 21-21.2 9.5 26/26 10
EMC-FBA21-13 14-9 20.955 21-21.2 9.5 26/26 10
3/4 EMC-FBA26-16 16-12 26.441 26.5-26.8 12 32/32 10
EMC-FBA26-18 18-14 26.441 26.5-26.8 12 32/32 10
1 EMC-FBA33-22 22-16 33.249 33.3-33.6 12.5 41/41 10
EMC-FBA33-25 25-18 33.249 33.3-33.6 12.5 41/41 10
1 1/4 EMC-FBA42-25 25-21 41.91 42-42.3 15 50/50 5
EMC-FBA42-30 30-24 41.91 42-42.3 15 50/50 5
1 1/2 EMC-FBA48-32 32-26 47.803 48-48.4 15 60/60 2
EMC-FBA48-39 41-31 47.803 48-48.4 15 60/60 2
2 EMC-FBA60-46 46-40 59.614 60-60.4 15 73/73 2
EMC-FBA60-49 51-44 59.614 60-60.4 15 73/73 2
 
NPT 3/8 EMC-NBA17-06 7-4 17.055 - 13 22 10
EMC-NBA17-10 10-6 17.055 - 13 22 10
NPT 1/2 EMC-NBA21-10 11-7 21.223 - 13 26 10
EMC-NBA21-13 14-9 21.223 - 13 26 10
NPT 3/4 EMC-NBA26-16 16-12 26.568 - 14 32 10
EMC-NBA26-18 18-14 26.568 - 14 32 10
NPT 1 EMC-NBA33-22 22-16 33.227 - 15 41 10
EMC-NBA33-25 25-18 33.227 - 15 41 10
NPT 1 1/4 EMC-NBA42-25 25-21 41.984 - 15 50 5
EMC-NBA42-30 30-24 41.984 - 15 50 5