Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Nylon Cable Glands /

Acid & Alkalis Proof Cable Glands (A-Type)

Acid & Alkalis Proof Cable Glands (A-Type)
Acid & Alkalis Proof Cable Glands (A-Type)

Thread Type: Metric and PG.

Material Data: Acid / Alkali proof thermoplastic polymer for A, C, E, F parts.
Acid / Alkali proof rubbers for B.D parts.

IP Protection: IP68 - 5 bar.

Working Temp.: -40°C to 100°C.

Application: The acid/alkali proof cable gland is specially designed to prevent strong acid corrosion from the manufacturing processes such as in the PCB, FPD, Photovoltaic, Chemical and Pharmaceutical industry, etc. These refined cable glands with corrosive resistance and with AVC's special designs from the multiple sizes of bodies & sealing inserts provide strong strain relief, watertight and airtight abilities over an entire cable range, which are the best cable entry system for the acid-proof demanded devices, machines and equipment.

* Contact us for designing & ordering different sealing hole patterns with varying diameters & other extended gland sizes. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Gaskets should be avoided to touch pertoleum-based fluids, mineral oils and solvents, aromatic hydrocarbons.
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.


Seal
Holes
Thread Cat.No. Cable
Range
mmØ
Thread
O.D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Spanner
Size
A/F
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
A Type
M12x1.5 MG12A-05-AA B 5.3-3 12 12-12.3 9 18/19 50
MG12A-08-AA B 7.8-4.5 12 12-12.3 9 18/19 50
M16x1.5 MG16A-06-ST-AA B 7-4 16 16-16.3 10 22/22 50
MG16A-10-ST-AA B 10-6 16 16-16.3 10 22/22 50
M20x1.5 MG20AM-08-AA B 8.8-5 20 20-20.3 15 24/24 50
MG20A-10-ST-AA B 11-7 20 20-20.3 10 27/27 50
MG20AM-11-AA B 12-7 20 20-20.3 15 24/24 50
MG20A-14-ST-AA B 14-9 20 20-20.3 10 27/27 50
M25x1.5 MG25A-16-ST-AA B 16-12 25 25-25.4 10 33/33 50
MG25A-18-ST-AA B 18-14 25 25-25.4 10 33/33 50
 
PG7 PGA7-05-AA B 5.3-3 12.5 12.5-12.8 8.5 17/19 50
PGA7-08-AA B 7.8-4.5 12.5 12.5-12.8 8.5 17/19 50
PG9 PGA9-05-AA B 5.3-3 15.2 15.2-15.5 9 22/19 50
PGA9-08-AA B 7.8-4.5 15.2 15.2-15.5 9 22/19 50
PG11 PGA11-06-AA B 7-4 18.6 18.6-18.9 10 24/22 50
PGA11-10-AA B 10-6 18.6 18.6-18.9 10 24/22 50
PG13.5 PGA13.5-08-AA B 8.8-5 20.4 20.4-20.7 10 27/24 50
PGA13.5-11-AA B 12-7 20.4 20.4-20.7 10 27/24 50
PG16 PGA16-10-AA B 11-7 22.5 22.5-22.8 11 30/27 50
PGA16-14-AA B 14-9 22.5 22.5-22.8 11 30/27 50
PG21 PGA21-16-AA B 16-12 28.3 28.3-28.7 12.5 36/33 50
PGA21-18-AA B 18-14 28.3 28.3-28.7 12.5 36/33 50
 
G(PF) 1/4 FGA13-05-AA B 5.3-3 13.157 13.2-13.4 9 19/19 50
FGA13-08-AA B 7.8-4.5 13.157 13.2-13.4 9 19/19 50
3/8 FGA17-06-AA B 7-4 16.662 16.7-16.9 10 22/22 50
FGA17-10-AA B 10-6 16.662 16.7-16.9 10 22/22 50
1/2 FGA21M-08-AA B 8.8-5 20.955 21-21.2 10 27/24 50
FGA21L-10-AA B 11-7 20.955 21-21.2 10 27/27 50
FGA21M-11-AA B 12-7 20.955 21-21.2 10 27/24 50
FGA21L-14-AA B 14-9 20.955 21-21.2 10 27/27 50
3/4 FGA26-16-AA B 16-12 26.441 26.5-26.8 12.5 33/33 50
FGA26-18-AA B 18-14 26.441 26.5-26.8 12.5 33/33 50