Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Nylon Cable Glands /

V0 Flameproof Cable Glands (A-Type)

V0 Flameproof Cable Glands (A-Type)
V0 Flameproof Cable Glands (A-Type)

Thread Type: Metric PG, G(PF).

Material Data: Flame-Retardant Nylon PA 66 (Flammability UL 94V-0) for A.C.E,F parts;
Flame-Retardant & Weather-Resistance Rubbers for B.D parts.
Our black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

IP Protection: IP68 - 5 bar.

Working Temp.: -40°C to 105°C. Short-Term to 160°C.

Application: The cable gland is assembled with high quality flame-retard ant polyamide body and sealing rubbers which is mainly designed for human & property protection. In addition, this connector accompanied with an unique design from AVC's special sealing & clamping system provides strong strain relief, waterproof and airtight abilities over the entire cable range, which offers an integrated performance on their excellent functional properties suitably for used in outdoor / indoor cable entry applications with the higher requirements of flame-protection in public buildings, office, store houses, undergrounds, tunnels, aeration systems, ships and supply installations, etc.

* Contact us for designing & ordering different sealing hole patterns with varying diameters & other extended gland sizes. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.


Seal
Holes
Thread Cat.No. Cable
Range
mmØ
Thread
O.D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Spanner
Size
A/F
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
A Type
M12x1.5 MG12A-05-V0 B 5.3-3 12 12-12.3 9 18/19 50
MG12A-08-V0 B 7.8-4.5 12 12-12.3 9 18/19 50
M16x1.5 MG16A-06-ST-V0 B 7-4 16 16-16.3 10 22/22 50
MG16A-10-ST-V0 B 10-6 16 16-16.3 10 22/22 50
M20x1.5 MG20AM-08-V0 B 8.8-5 20 20-20.3 15 24/24 50
MG20A-10-ST-V0 B 11-7 20 20-20.3 10 27/27 50
MG20AM-11-V0 B 12-7 20 20-20.3 15 24/24 50
MG20A-14-ST-V0 B 14-9 20 20-20.3 10 27/27 50
M25x1.5 MG25A-16-ST-V0 B 16-12 25 25-25.4 10 33/33 50
MG25A-18-ST-V B 18-14 25 25-25.4 10 33/33 50
 
PG 7 PGA7-05-V0 B 5.3-3 12.5 12.5-12.8 8.5 17/19 50
PGA7-08-V0 B 7.8-4.5 12.5 12.5-12.8 8.5 17/19 50
PG 9 PGA9-05-V0 B 5.3-3 15.2 15.2-15.5 9 22/19 50
PGA9-08-V0 B 7.8-4.5 15.2 15.2-15.5 9 22/19 50
PG 11 PGA11-06-V0 B 7-4 18.6 18.6-18.9 10 24/22 50
PGA11-10-V0 B 10-6 18.6 18.6-18.9 10 24/22 50
PG 13.5 PGA13.5-08-V B 8.8-5 20.4 20.4-20.7 10 27/24 50
PGA13.5-11-V0 B 12-7 20.4 20.4-20.7 10 27/24 50
PG 16 PGA16-10-V0 B 11-7 22.5 22.5-22.8 11 30/27 50
PGA16-14-V0 B 14-9 22.5 22.5-22.8 11 30/27 50
PG 21 PGA21-16-V0 B 16-12 28.3 28.3-28.7 12.5 36/33 50
PGA21-18-V0 B 18-14 28.3 28.3-28.7 12.5 36/33 50
 
G(PF) 1/4 FGA13-05-V0 B 5.3-3 13.157 13.2-13.4 9 19/19 50
FGA13-08-V0 B 7.8-4.5 13.157 13.2-13.4 9 19/19 50
3/8 FGA17-06-V0 B 7-4 16.662 16.7-16.9 10 22/22 50
FGA17-10-V B 10-6 16.662 16.7-16.9 10 22/22 50
1/2 FGA21M-08-V0 B 8.8-5 20.955 21-21.2 10 27/24 50
FGA21L-10-V0 B 11-7 20.955 21-21.2 10 27/27 50
FGA21M-11-V0 B 12-7 20.955 21-21.2 10 27/24 50
FGA21L-14-V0 B 14-9 20.955 21-21.2 10 27/27 50
3/4 FGA26-16-V0 B 16-12 26.441 26.5-26.8 12.5 33/33 50
FGA26-18-V0 B 18-14 26.441 26.5-26.8 12.5 33/33 50