Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Plastic & Hardware Electronic Products / Cable glands / Nylon Cable Glands /

Flex Protecting Cable Glands (B-Type)

Flex Protecting Cable Glands (B-Type)
Flex Protecting Cable Glands (B-Type)

Thread Type: Metric and PG.

Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2) for A.C.F parts. (Contact us for Flammability VO material).
Standard in weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications).
Our black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm ) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.

IP Protection: IP68 - 5 bar.

Working Temp.: -40°C to 105°C. Short-Term to 160°C.

Application: AVC UL-certified flex protecting cable glands limit the cable bending to avoid twisted and protect the cable jacket against break at the bending point to reduce the risk of failure. With their outstanding ability in weather resistance, strain relief, watertight and airtight performances, the flex protecting cable glands are the best cable entry systems with safety features ideally used in the fields of flexible cables on hand-held equipment, moving machine parts, telecommunications, wireless networking ODUs, solar PV modules, inverters, lightings, displays, surveillance cameras, measurings, sensors and other instruments.

* Contact us for designing & ordering different sealing hole patterns with varying diameters. (Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. (Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations.


Seal
Holes
Thread Cat.No. Cable
Range
mmØ
Thread
O.D.
C1
mm
Panel
Mounting
Hole
mm
Thread
Length
C2
mm
Spanner
Size
A/F
mm
Std.
Pkg.
pcs
Sizes Black
RAL
9005
Light
Grey
RAL
7035
Silver
Grey
RAL
7001
B Type
M12x1.5 MGB12-P-05-ST B G SG 5.5-3 12 12-12.3 8.5 18/15 10
MGB12-P-07-ST B G SG 6.8-4 12 12-12.3 8.5 18/15 10
M16x1.5 MGB16-P-07-ST B G SG 7-4 16 16-16.3 10 22/22 10
MGB16-P-10-ST B G SG 10-6.4 16 16-16.3 10 22/22 10
M20x1.5 MGB20M-P-08-ST B G SG 8.8-5 20 20-20.3 9.5 24/24 10
MGB20-P-10-ST B G SG 11-7 20 20-20.3 10 27/27 10
MGB20M-P-11-ST B G SG 11.5-6 20 20-20.3 9.5 24/24 10
MGB20-P-13-ST B G SG 13-8 20 20-20.3 10 27/27 10
M25x1.5 MGB25-P-16-ST B G SG 15.8-12 25 25-25.4 10 33/33 10
 
M12x1.5 MGB12L-P-05 B G SG 5.5-3 12 12-12.3 15 18/19 10
MGB12L-P-08 B G SG 8-4 12 12-12.3 15 18/19 10
M16x1.5 MGB16-P-07 B G SG 7-4 16 16-16.3 15 22/22 10
MGB16-P-10 B G SG 10-6.4 16 16-16.3 15 22/22 10
M20x1.5 MGB20M-P-08 B G SG 8.8-5 20 20-20.3 15 24/24 10
MGB20-P-10 B G SG 11-7 20 20-20.3 15 27/27 10
MGB20M-P-11 B G SG 11.5-6 20 20-20.3 15 24/24 10
MGB20-P-13 B G SG 13-8 20 20-20.3 15 27/27 10
M25x1.5 MGB25-P-16 B G SG 15.8-12 25 25-25.4 15 33/33 10
 
PG7 PGB7-P-05 B G SG 5.5-3 12.5 12.5-12.8 8 17/15 10
PGB7-P-07 B G SG 6.8-4 12.5 12.5-12.8 8 17/15 10
PG9 PGB9-P-05 B G SG 5.5-3 15.2 15.2-15.5 8.5 22/19 10
PGB9-P-09 B G SG 8-4 15.2 15.2-15.5 8.5 22/19 10
PG11 PGB11-P-07 B G SG 7-4 18.6 18.6-18.9 9 24/22 10
PGB11-P-10 B G SG 10-6.4 18.6 18.6-18.9 9 24/22 10
PG13.5 PGB13.5-P-08 B G SG 8.8-5 20.4 20.4-20.7 10 27/24 10
PGB13.5-P-11 B G SG 11.5-6 20.4 20.4-20.7 10 27/24 10
PG16 PGB16-P-10 B G SG 11-7 22.5 22.5-22.8 10 30/27 10
PGB16-P-13 B G SG 13-8 22.5 22.5-22.8 10 30/27 10
PG21 PGB21-P-16 B G SG 15.8-12 28.3 28.3-28.7 12 36/33 10
 
G(PF) 1/4 FGB13-P-05 B G SG 5.5-3 13.157 13.2-13.4 8 19/19 10
FGB13-P-07 B G SG 6.8-4 13.157 13.2-13.4 8 19/19 10
3/8 FGB17-P-07 B G SG 7-4 16.662 16.7-16.9 10 22/22 10
FGB17-P-10 B G SG 10-6.4 16.662 16.7-16.9 10 22/22 10
1/2 FGB21S-P-07 B G SG 7-4 20.955 21-21.2 10 27/22 10
FGB21M-P-08 B G SG 8.8-5 20.955 21-21.2 10 27/24 10
FGB21S-P-10 B G SG 10-6.4 20.955 21-21.2 10 27/22 10
FGB21L-P-10 B G SG 11-7 20.955 21-21.2 12 27/27 10
FGB21M-P-11 B G SG 11.5-6 20.955 21-21.2 10 27/24 10
FGB21L-P-13 B G SG 13-8 20.955 21-21.2 12 27/27 10
3/4 FGB26-P-16 B G SG 15.8-12 26.441 26.5-26.8 12 33/33 10
 
NPT 3/8 NPB17-P-07 B G SG 7-4 17.055 - 15 22 10
NPB17-P-10 B G SG 10-6.4 17.055 - 15 22 10
NPT 1/2 NPB21-P-10 B G SG 11-7 21.223 - 15 27 10
NPB21-P-13 B G SG 13-8 21.223 - 15 27 10
NPT 3/4 NPB26-P-16 B G SG 15.8-12 26.568 - 15 33 10