Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Plastic & Hardware Electronic Products / Cable glands / Nylon Cable Glands /
Mini Cable Glands (B-Type)
 |
Thread Type: Metric and PG.
Material Data: Halogen-free Nylon PA 66 (Flammability UL 94V-2 ) for A.C.F parts. (Contact us for Flammability V0 material).
Weather-resistant EPDM rubbers for B.D parts. (NBR rubber is optional for oil-resistance applications).
Our black cable glands are suitable for outdoor use have been subjected to UV light exposure and water immersion same as UL746C (f1) rating.
UV (Irradiance 340 nm) exposure is performed by using a xenon-arc weatherometer for 1000 hours and intermittent exposure to water spray.
IP Protection: IP68 - 5 bar.
Working Temp.: - 40°C to 105°C. Short-Term to 160°C.
Application: The smallest & reined mini cable glands are made for tiny devices & equipment where the spaces are limited and the demands IP68 & strain
relief are required for mounting small cable diameters. Due to their special designs, cable with a diameter from 1 mm to 6 mm can be mounted
with only two mini cable gland sizes. AVC polyamide mini-type cable glands have the smallest bodies with the best approved weather resistant,
waterproof and strain relief abilities in outdoor / indoor cable entry applications, which are the best cord grip systems used for electrical and
electronics technologies, solar PV modules, LED lights, trafic signals, surveillance cameras, measuring and sensor equipment.
* Contact us for designing & ordering different sealing hole patterns. ( Sealing Inserts are not sold separately)
* AVC sealing inserts are available in split versions for mounting wires with pre-assembled terminals or connectors. ( Minimum order quantity is required)
* The Washer (Gasket) and Lock Nut are all included in each cable gland, this saves additional ordering work and storage locations. |
Seal
Holes |
Thread |
Cat.No. |
Cable
Range
mmØ |
Thread
O.D.
C1
mm |
Panel
Mounting
Hole
mm |
Thread
Length
C2
mm |
Spanner
Size
A/F
mm |
Body
Min.
I.D.
mm |
Std.
Pkg.
pcs |
| Sizes |
Black
RAL
9005 |
Light
Grey
RAL
7035 |
Silver
Grey
RAL
7001 |
B Type
 |
M8x1.25 |
MGB8-02-ST |
B |
G |
SG |
2.5 - 1 |
8 |
8 - 8.3 |
7.5 |
13/12 |
4.5 |
50 |
| MGB8-04-ST |
B |
G |
SG |
4.5-2.5 |
8 |
8 - 8.3 |
7.5 |
13/12 |
4.5 |
50 |
| M10x1.5 |
MGB10-03-ST |
B |
G |
SG |
3.1 - 1.5 |
10 |
10 - 10.3 |
8 |
15/13 |
6 |
50 |
| MGB10-06-ST |
B |
G |
SG |
6-3 |
10 |
10 - 10.3 |
8 |
15/13 |
6 |
50 |
| M12x1.5 |
MGB12S-03-ST |
B |
G |
SG |
3.1 - 1.5 |
12 |
12 - 12.3 |
8 |
18/13 |
6 |
50 |
| MGB12S-06-ST |
B |
G |
SG |
6-3 |
12 |
12 - 12.3 |
8 |
18/13 |
6 |
50 |
| |
| PG7 |
PGB7S-03 |
B |
G |
SG |
3.1 - 1.5 |
12.5 |
12.5 - 12.8 |
8 |
17/ 13 |
6 |
50 |
| PGB7S-06 |
B |
G |
SG |
6-3 |
12.5 |
12.5 - 12.8 |
8 |
17/13 |
6 |
50 |
|
