Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Power Supplies / FS series /

FS-100W series

LED rainproof power supply

Features:
- 170~264VAC AC input
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage
- Cooling by free air convection
- Fully encapsulated with IP44 level
- 100% full load burn-in test
- 2 year warranty

Model FS-100-12 FS-100-15 FS-100-24 FS-100-36 FS-100-48
output DC voltage 12V 15V 24V 36V 48V
Voltage tolerance ±1% ±1% ±1% ±1% ±1%
Rated current 8.5A 6.7A  4.2A 2.8 2
Current range 0~8.5A 0~6.7A 0~4.2A 0~2.8A 0~2A
Rated power 102W 100.5W 100.8W 100.8W 96W
Ripple&noise 150mvp-p 150mvp-p 150mvp-p 200mvp-p 200mvp-p
DCvoltage ADJ.range ±10% ±10% ±10% ±10% ±10%
input Voltage range 170~264VAC, 255~373VDC
frequency 47~63HZ
AC current 1.2A/230VAC
Efficiency 82% 82% 84% 85% 86%
Inrush current Cold start current  45A/230VAC
Leakage current < 3.5mA/240VAC
protection Overload Rated output power115%~150%  start over load protection
protection type: hiccup mode, auto-recovery after fault condition is removed
Over voltage 15.6~17.8V 18.6~20.8V 30.6~33.2V 42.6~44.2V 54.8~56.6V
protection type: hiccup mode, auto-recovery after fault condition is removed
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp, humidity -20°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard Safety standard Fit UL1012  IP44
EMC standard EN55022, CLASS A
others Dimension 206*125*50mm (L*W*H)
Weight/packing 0.87kg/20pcs/18.5kg/0.039m3/1.36CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.