Company Profile
  Contact Us

Battery Holders
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Power Supplies
Power supply filters
Quartz Crystal
Test Probes


Power Supplies / HLG Series /

HLG-100W series

Full function adjustable waterproof power supply

- Universal AC input
- Built-in power factor correction
- Protections:short circuit/over load/over voltage/over temp
- Cooling by free air convection
- OCP point adjustable through output cable or internal potentiometer
- IP67/65 design for indoor or outdoor installations
- Suitble for LED lighting and moving sign applications
- 3 Year warranty

Model HLG-100-12 HLG-100-20 HLG-100-24 HLG-100-36 HLG-100-48
output DC voltage 12V 20V 24V 36V 48V
Constant current region 6~12V 10~20V 12~24V 18~36V 24~48V
Rated current 5A 4.8A 4A 2.65A 2A
Rated power 60W 96W 96W 95.4W 96W
Ripple&noise 150mvp-p 150mvp-p 150mvp-p 200mvp-p 200mvp-p
Voltage ADJ range 10.8~13V 17~22V 22~27V 33~40V 43~53V
Current  ADJ range Can be adjusted by internal potentiometer or through output cable
  3~5A 3~4.8A 2.5~4A 1.7~2.65A 1.2~2A
input Voltage range 90~264VAC, 47~63HZ , 127~370VDC
AC current 1.2A/115VAC, 0.55A/230VAC
Power factor PF>0.95/230VAC,PF>0.98/115VAC Start overload protection
Efficiency 90% 93% 93% 93% 93%
Inrush current Cold start current 35A/115VAC, 75A/230VAC
Leakage current < 0.75mA/240VAC
protection Over current 95%~108% 
protection type :Constant current limiting, auto-recovery after fault condition is removed
Short circuit Hiccup mode, recovers  automatically  after fault condition is remove
Over voltage 14~17V 23~27V 28~34V 41~46V 54~60V
protection type:Shut down o/p voltage re-power on to recover
Over temperature 100°C±10°C(RTH2)
protection type:Shut down o/p voltage re-power on to recover
environment Working temp, humidity -20°C~+60, 20%~90%RH
Storage temp, humidity -40°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard Safety standard Fit UL1310 CLASS2,TUV EN61347-1,EN61347-2-13, IP65approved
EMC standard Fit EN55015, EN61000-3-2 ClassC(>60%load):EN61000-3-3
others Dimension 223*69*39mm (L*W*H)
Weight/packing 1kg/20pcs/21kg/0.03m3/1.07CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.