Company Profile
  Contact Us

Battery Holders
Gas tubes
Heat Sinks
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Power Supplies
Power supply filters
Quartz Crystal
Test Probes


Power Supplies / HS Series /

HS-35W series

Compact single switching power supply

- 170~264VAC AC input
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage/over temp
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- 2 year warranty

Model HS-35-5 HS-35-12 HS-35-15 HS-35-24
output DC voltage 5V 12V 15V 24V
Voltage tolerance ±2% ±1% ±1% ±1%
Rated current 5A 3A 2.4A 1.5A
Current range 0~5A 0~3A 0~2.4A 0~1.5A
Rated power 25W 36W 36W 36W
Ripple&noise 80mvp-p 120mvp-p 120mvp-p 120mvp-p
DCvoltage ADJ.range -9%~+10% ±10% ±10% ±10%
input Voltage range 170~264VAC, 235~373VDC
frequency 47~63HZ
AC current 0.45A/230VAC
Efficiency 76% 78% 78% 80%
Inrush current Cold start current  30A/230VAC
Leakage current < 1mA/240VAC
protection Overload Rated output power115%~135%  start over load protection
protection type: hiccup mode, auto-recovery after fault condition is removed
Over voltage Rated output power145%~170%
protection type: hiccup mode, auto-recovery after fault condition is removed
Over temp When temperature of transistor inner node is over 150°C,Start over temp protection
protection type: hiccup mode, auto-recovery after temperature become normal
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp, humidity -20°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard Safety standard Fit UL1012
EMC standard EN55022, CLASS A
others Dimension 84*58*38mm (L*W*H)
Weight/packing 0.17kg/80pcs/14.5kg/0.024m3/0.87CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.