Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Power Supplies / HS Series /
HS-480W series
 |
Features:
- AC input voltage range selected by switch
- Small volume, low weight, high efficiency
- Protections: short circuit / over load / over voltage / over temperature
- 100% full load burn-in test
- 2 year warranty |
| Model |
HS-480-5 |
HS-480-12 |
HS-480-24 |
HS-480-27 |
HS-480-36 |
HS-480-48 |
| output |
DC voltage |
5V |
12V |
24V |
27V |
36V |
48V |
| Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
| Rated current |
70A |
40A |
20A |
18A |
13.5A |
10A |
| Current range |
0~70A |
0~40A |
0~20A |
0~18A |
0~13.5A |
0~10A |
| Rated power |
350W |
480W |
480W |
486W |
486W |
480W |
| Ripple&noise |
120mvp-p |
150mvp-p |
180mvp-p |
200mvp-p |
240mvp-p |
240mvp-p |
| DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
-9%~+10% |
±10% |
±10% |
| input |
Voltage range |
90~132VAC / 180~264VAC (selected by switch), 255~373VDC |
| Frequency |
47~63HZ |
| AC current |
10.5A/115VAC, 5.5A/230VAC |
|
Efficiency |
81% |
84% |
86% |
86% |
86% |
87% |
| Inrush current |
Cold start current 25A/115VAC, 50A/230VAC |
| Leakage current |
< 3.5mA/240VAC |
| protection |
Overload |
Rated output power 105%~135% start over load protection |
| protection type: hiccup mode, auto-recovery after fault condition is removed |
| Over voltage |
115%~135% |
| protection type: hiccup mode, auto-recovery after fault condition is removed |
| Over temperature |
>50°C fan on, >45°C fan off, >95°C±5°C start over temperature protection |
Protection mode:cutoff output，auto-recovery after temperature become normal |
| environment |
Working temp, humidity |
-10°C~+60, 20%~90%RH |
| Storage temp, humidity |
-20°C~+85, 10%~95%RH non-condensing |
| Withstand vibration |
10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes |
| safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG: 0.5KVAC |
| Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC |
|
fit standard |
Safety standard |
Fit UL1012 |
| EMC standard |
EN55022, CLASS A |
| others |
Dimension |
215*115*50mm (L*W*H) |
| Weight/packing |
1kg/24pcs/25kg/0.049 m3 |
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12"
twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
