Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Power Supplies / HS Series /

HS-600W series

Compact single switching power supply

Features:
- AC input voltage range selected by switch
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage/over temp
- Built-in cooling DC fan
- Cooling fan ON-OFF auto control
- LED indicator for power on
- 100% full load burn-in test
- 2 year warranty

Model HS-600-12 HS-600-13.5 HS-600-15 HS-600-24 HS-600-36 HS-600-48
output DC voltage 12V 13.5V 15V 24V 36V 48V
Voltage tolerance ±2% ±1% ±1% ±1% ±1% ±1%
Rated current 50A 44.5A 40A 25A 16.6A 12.5A
Current range 0~50A 0~44.5A 0~40A 0~25A 0~16.6A 0~12.5A
Rated power 600W 600.8W 600W 600W 597.6W 600W
Ripple&noise 150mvp-p 150mvp-p 150mvp-p 180mvp-p 200mvp-p 200mvp-p
DCvoltage ADJ.range ±10% ±10% ±10% ±10% ±10% ±10%
input Voltage range 90~132VAC / 180~264VAC (selected by switch), 255~373VDC
Frequency 47~63HZ
AC current 12A/115VAC, 6.0A/230VAC
Efficiency 82% 82% 83% 84% 85% 86%
Inrush current Cold start current 25A/115VAC, 50A/230VAC
Leakage current < 3.5mA/240VAC
protection Overload Rated output power105%~135%  start over load protection
protection type: hiccup mode, auto-recovery after fault condition is removed
Over voltage 15.6~17.8V 15.6~17.8V 18.6~20.8V 30.6~33.2V 42.6~44.2V 54.8~56.6V
protection type: hiccup mode, auto-recovery after fault condition is removed
Over temperature >55°Cfan on, ≤50°Cfan off, >85°C start over temperature protection
protection type: hiccup mode, auto-recovery after temperature become normal
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp, humidity -20°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard Safety standard Fit UL1012
EMC standard EN55022, CLASS A
others Dimension 238*124*65mm (L*W*H)
Weight/packing 1.5kg/12pcs/19kg/0.033m3/1.18CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.