Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Power Supplies / LPV Series /
LPV-120W series
 |
LED constant voltage waterproof switching power supply
Features:
- Constant voltage style power supply
- 180~264VAC AC input
- Small volume, low weight, high efficiency
- Protections: short circuit/over load/over voltage/over temp
- Cooling by free air convection
- Fully encapsulated with IP67 level
- 100% full load burn-in test
- 1 year warranty |
|
Model |
LPV-120-12 |
LPV-120-24 |
LPV-120-36 |
LPV-120-48 |
|
output |
DC voltage |
12V |
24V |
36V |
48V |
|
Voltage tolerance |
±1% |
±1% |
±1% |
±1% |
|
Rated current |
10A |
5A |
3.3A |
2.5A |
|
Current range |
0~10A |
0~5A |
0~3.3A |
0~2.5A |
|
Rated power |
120W |
120W |
118.8W |
120W |
| Ripple&noise |
100mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
|
input |
Voltage range |
180~264VAC, 255~373VDC |
|
Frequency |
47~63HZ |
|
AC current |
1.2A/230VAC |
|
Efficiency |
82% |
84% |
84% |
85% |
|
Inrush current |
Cold start current 40A/230VAC |
|
Leakage current |
<2.5mA/240VAC |
|
protection |
Over load |
Rated output power 105%~135%start over load protection |
|
protection type: hiccup mode, auto-recovery after fault condition is removed |
|
Over voltage |
15.6~17.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
|
protection type: hiccup mode, auto-recovery after fault condition is removed |
|
Over temperature |
Shell temp>85°C, start over temperature protection |
|
protection mode: cutoff output, auto-recovery after temperature become normal |
|
environment |
Working temp, humidity |
-10°C~+60, 20%~90%RH |
|
Storage temp.humidity |
-20°C~+85, 10%~95%RH non condensing |
|
Withstand vibration |
10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes |
|
safety |
Withstand voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
|
Isolated resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC |
|
fit standard |
Safety standard |
Fit UL1012, IP67 protect level |
|
eMC standard |
Fit EN55022, CLASS A |
|
others |
Dimension |
215*69*43mm (L*W*H) |
|
Weight/packing |
1.1kg/20pcs/23kg/0.03 m3/1.07CUFT |
|
note |
1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12"
twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
