Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Power Supplies / LPV Series /

LPV-200W series

LED constant voltage waterproof switching power supply

Features:
- Constant voltage style power supply
- 180~264VAC AC input
- Small volume, low weight, high efficiency
- Protections: short circuit/over load/over voltage/over temp
- Cooling by free air convection
- Fully encapsulated with IP67 level
- 100% full load burn-in test
- 1 year warranty

Model LPV-200-12 LPV-200-24 LPV-200-36 LPV-200-48
output DC voltage 12V 24V 36V 48V
Voltage tolerance ±1% ±1% ±1% ±1%
Rated current 16.5A 8.3A 5.5A 4.2A
Current range 0~16.5A 0~8.3A 0~5.5A 0~4.2A
Rated power 198W 199.2W 198W 201.6W
Ripple&noise 150mvp-p 200mvp-p 200mvp-p 240mvp-p
input Voltage range 180~264VAC, 255~373VDC
Frequency 47~63HZ
AC current 2.5A/230VAC
Efficiency 82% 84% 84% 85%
Inrush current Cold start current 40A/230VAC
Leakage current <2.5mA/240VAC
protection Over load Rated output power 105%~135%start over load protection
protection type: hiccup mode, auto-recovery after fault condition is removed
Over voltage 15.6~17.8V 30.6~33.2V 42.6~44.2V 54.8~56.6V
protection type: hiccup mode, auto-recovery after fault condition is removed
Over temperature Shell temp>85°C, start over temperature protection
protection mode: cutoff output, auto-recovery after temperature become normal
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp.humidity -20°C~+85, 10%~95%RH non condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes
safety Withstand voltage I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolated resistance I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC
fit standard Safety standard Fit UL1012, IP67 protect level
eMC standard Fit EN55022, CLASS A
others Dimension 240*69*43mm (L*W*H)
Weight/packing 1.26kg/20pcs/26kg/0.033 m3/1.15CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.