Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Power Supplies / LPV Series /

LPV-35E series

LED constant voltage waterproof switching power supply

Features:
- Constant voltage style power supply
- Universal AC input
- Small volume, low weight, high efficiency
- Protections: short circuit/over load/over voltage
- Cooling by free air convection
- Fully encapsulated with IP67 level
- 100% full load burn-in test
- 2 year warranty

Model LPV-35E-5 LPV-35E-12 LPV-35E-15 LPV-35E-24
output DC voltage 5V 12V 15V 24V
Voltage tolerance ±1% ±1% ±1% ±1%
Rated current 6A 3A 2.4A 1.5A
Current range 0~6A 0~3A 0~2.4A 0~1.5A
Rated power 30W 36W 36W 36W
Ripple&noise 80mvp-p 120mvp-p 120mvp-p 150mvp-p
input Voltage range 90~264VAC, 127~373VDC
Frequency 47~63HZ
AC current 1.1A/115VAC, 0.7A/230VAC
Efficiency 77% 84% 84% 85%
Inrush current Cold start current 30A/115VAC, 60A/230VAC
Leakage current < 0.25mA/240VAC
protection Over load Rated output power 110%~150%start over load protection
protection type: hiccup mode, auto-recovery after fault condition is removed
Over voltage 6.8~8.2V   15.6~17.8V   18.6~20.8V 30.6~33.2V
protection type: cutoff output, recovery after restart power
environment Working temp, humidity -20°C~+60, 20%~90%RH
Storage temp.humidity -40°C~+85, 10%~95%RH non condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes
safety Withstand voltage I/P-O/P: 1.5KVAC
Isolated resistance I/P-O/P: 100M ohms/500VDC
fit standard safety standard Fit UL1012, IP67 protect level
eMC standard Fit EN55022, CLASS A
others Dimension 148*40*30mm (L*W*H)
Weight/packing 0.34kg/48pcs/17kg/0.024m3/0.87CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.