Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Power Supplies / NES Series /
NES-350W series
|
Efficient single switching power supply
Features:
- AC input voltage range selected by switch
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage/over temp
- Built-in cooling DC fan
- Cooling fan ON-OFF auto control
- LED indicator for power on
- 100% full load burn-in test
- 2 year warranty |
Model |
NES-350-5 |
NES-350-12 |
NES-350-15 |
NES-350-24 |
NES-350-48 |
output |
DC voltage |
5V |
12V |
15V |
24V |
48V |
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
Rated current |
60A |
29A |
23.3A |
14.6A |
7.3A |
Current range |
0~60A |
0~29A |
0~23.3A |
0~14.6A |
0~7.3A |
Rated power |
300W |
348W |
349.5W |
350.4W |
350.4W |
Ripple&noise |
150mvp-p |
150mvp-p |
150mvp-p |
150mvp-p |
240mvp-p |
DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
±10% |
input |
Voltage range |
90~132VAC / 180~264VAC (selected by switch), 255~373VDC |
Frequency |
47~63HZ |
AC current |
7A/115VAC, 4A/230VAC |
Efficiency |
80% |
84% |
84% |
86% |
87% |
Inrush current |
Cold start current 40A/115VAC, 60A/230VAC |
Leakage current |
< 3.5mA/240VAC |
protection |
Overload |
Rated output power105%~135% start over load protection |
protection type: hiccup mode, auto-recovery after fault condition is removed |
Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
54.8~56.6V |
protection type: hiccup mode, auto-recovery after fault condition is removed |
Over temperature |
>50°Cfan on, ≤45°Cfan off, >95°C±5°C start over temperature protection |
protection mode: cutoff output, auto-recovery after temperature become normal |
environment |
Working temp, humidity |
-20°C~+60, 20%~90%RH |
Storage temp, humidity |
-40°C~+85, 10%~95%RH non-condensing |
Withstand vibration |
10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes |
safety |
Withstand voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC |
fit standard |
Safety standard |
Fit UL1012 |
EMC standard |
EN55022, CLASS A |
others |
Dimension |
215*115*50mm (L*W*H) |
Weight/packing |
1.0kg/24pcs/25kg/0.049 m3/1.72CUFT |
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"
twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|