Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 

Power Supplies / S Series /

S-201W series

Normal single switching power supply

Features:
- AC input voltage range selected by switch
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage/over temp
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- 2 year warranty

Model S-201-5 S-201-12 S-201-15 S-201-24 S-201-27 S-201-48
output DC voltage 5V 12V 15V 24V 27V 48V
Voltage tolerance ±2% ±1% ±1% ±1% ±1% ±1%
Rated current 40A 16.5A 13.4A 8.3A 7.4A 4.2A
Current range 0~40A 0~16.5A 0~13.4A 0~8.3A 0~7.4A 0~4.2A
Rated power 200W 198W 201W 199.2W 199.8W 201.6W
Ripple&noise 120mvp-p 150mvp-p 150mvp-p 180mvp-p 180mvp-p 200mvp-p
DCvoltage ADJ.range ±10% ±10% ±10% ±10% ±10% ±10%
input Voltage range 90~132VAC / 180~264VAC (selected by switch), 255~373VDC
Frequency 47~63HZ
AC current 4.5A/115VAC, 2.5A/230VAC
Efficiency 78% 80% 80% 82% 82% 83%
Inrush current Cold start current 25A/115VAC, 50A/230VAC
Leakage current < 3.5mA/240VAC
protection Overload Rated output power105%~135%  start over load protection
protection type: rated current limit, auto-recovery after fault condition is removed
Over voltage 6.8~8.2V 15.6~17.8V 18.6~20.8V 30.6~33.2V 33.2~35.6V 54.8~56.6V
protection type: hiccup mode, auto-recovery after fault condition is removed
Over temperature

inner temperature>85°C start over temperature protection

protection mode: cutoff output, auto-recovery after temperature become normal
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp, humidity -20°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
fit standard Safety standard Fit UL1012
EMC standard EN55022, CLASS A
others Dimension 215*115*50mm (L*W*H)
Weight/packing 0.87kg/24pcs/22kg/0.049 m3/1.72CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.