Company Profile
  Contact Us

Battery Holders
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Power Supplies
Power supply filters
Quartz Crystal
Test Probes


Power Supplies / T Series /

T-120W C D series

Normal triple switching power supply

- AC input voltage range selected by switch
- Small volume, low weight, high efficiency
- Protections:short circuit/over load/over voltage
- LED indicator for power on
- 100% full load burn-in test
- 2 year warranty

Model T-120C T-120D
output DC voltage CH1: +5V CH2: +15V CH3:-15V CH1: +5V CH2: +12V CH3:24V
Voltage tolerance ±2% ±6% ±6% ±2% ±6% ±6%
Rated current 10A 3.5A 1A 8A 2.5A 2A
Current range 2~10A 0.5~3.5A 0.2~1A 2~8A 0.5~2.5A 0.2~1A
Rated power 117.5W 118W
Ripple&noise 80mvp-p 120mvp-p 100mvp-p 80mvp-p 120mvp-p 150mvp-p
DCvoltage ADJ.range CH1: -9%~+10%
input Voltage range 90~132VAC / 180~264VAC (selected by switch), 255~373VDC
Frequency 47~63HZ
AC current 2.8A / 115VAC, 1.6A / 230VAC
Efficiency 78% 80%
Inrush current Cold start current 30A/115VAC, 60A/230VAC
Leakage current < 3.5mA/240VAC
protection Overload Rated output power 110%~150 start over load protection
protection type: cutoff output, recovery after restart power
over voltage CH1, CH2: 115~135%
protection type: cutoff output, recovery after restart power
environment Working temp, humidity -10°C~+60, 20%~90%RH
Storage temp, humidity -20°C~+85, 10%~95%RH non-condensing
Withstand vibration 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fitstandard Safety standard Fit UL1012
EMC standard EN55022, CLASS A
others Dimension 199*110*50mm (L*W*H)
Weight/packing 0.85kg/24pcs/21.5kg/0.043m3/1.51CUFT
note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using
a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.