Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Quartz Crystal Devices / Quartz Crystal Resonators / DIP Tuning Fork /
DT26
DIP Tuning Fork 2x6 mm
 |
Tuning fork crystal in 2 x 6 mm cylinder type
32.768 KHz standard
±20 ppm Standard
Excellent Reliability Performance |
| PARAMETERS |
SPECIFICATION |
| Frequency Range |
32.768KHz (30.00~ 200.00 KHz available) |
| Loading Capacitance |
12.5pF Std. 6 pF~20pF available |
| Drive Level |
1.0μW Max |
| Frequency Tolerance |
±5ppm / ±10ppm / ±20ppm (at 25°C) |
| Equivalent Resistance |
40KΩ Max |
| Temperature coefficient |
-0.04×10-6
/ °C2
max
-0.034×10-6 / °C2
typical |
| Operating Temperature |
-20...+70°C / -40...+85°C |
| Storage Temp. Range |
-40...+85°C |
| Aging (25°C) |
±5ppm max |
FREQUENCY STABILITY VS. TEMPERATURE
Operation
Temperature
Range |
Frequency Stability |
| -80ppm |
-160ppm |
| -10...+60°C |
● |
|
| -20...+70°C |
|
● |
● standart; ○ available
Mounting of cylinder type products:
Soldering the body of the cylinder type crystal units with PCB must be avoided due to deteriorate the characteristics or damage
the products. Rubber adhesive is recommended.
Soldering
Lead wires should be soldered within 3 seconds with the soldering iron
heated to a temperature no higher than 300°C
|
