Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

Potentiometers / Slide Potentiometers / 9.5 mm size /

S__33N-_A2-
9.5 mm size Slide Potentiometers

Characteristics Mechanical:   Operating force 20-200 gf Stopper strength 5 kgf Lever wobble 2(2*L)/ 20 mm max. Bending moment 250 gf.cm Push pull strength 3 kgf Click slip-out force 20-200 gf Lever deviation 0.5 max. (one side)     Electrical:   Total resistance 5 KΩ - 2 MΩ Total resistance tolerance ±20% more than 1 MΩ ± 30% Resistance taper A, B, C, D, K, W Insulation resistance 100 MΩ min. at 250 V DC Withstand voltage AC 300V (1 minute) Rated power (W) Taper Travel (mm) 15 20 30 45 B Single 0.05 0.1 0.2 0.25 Dual 0.025 0.05 0.1 0.125 Except B Single 0.025 0.05 0.1 0.125 Dual 0.012 0.025 0.05 0.06 Max. operating voltage (AC V) Taper Travel (mm) 15 20 30 45 B Single 100 200 200 200 Dual 100 100 200 200 Except B Single 50 150 150 150 Dual 50 50 150 150 Residual resistance Total resistance 10 KΩ 50 KΩ 100 KΩ 200 KΩ 500 KΩ 1 MΩ Between terminals 1-2 10 Ω 10 Ω 10 Ω 20 Ω 20 Ω 20 Ω Between terminals 2-3 10 Ω 10 Ω 20 Ω 20 Ω 50 Ω 50 Ω     Durability:   Sliding life 15000 cycles

P.C.B. Mounting Hole Detail Type T A B C D E F S152_ 15 30 26 - - 28.5 18 S202_ 20 35 31 6.2 9.8 33.5 23 S302_ 30 45 41 16.2 19.8 43.5 33 S452_ 45 60 56 - - 58.5 48   Lever type Material Type Dimensions, mm H Insulated lever C X 7 1 2 3 5 6 L 5 10 12.5 15 18 20 F 5 5 5 5 5 5 CA X 8 9 L 5 10