Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 
Connectors >> Board-to-Board connectors, pin headers and sockets >> pitch 2,0x2,0 mm

1999P-XXXG-H15-XXX series

plugs pin open straight four-row on Board for mounting in holes, pitch 2,0x2,0 mm

1999P-XXXG-H15-XXX series, plugs pin open straight four-row on Board for mounting in holes, pitch 2,0x2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0x2,0 mm

Drawing
1999P-XXXG-H15-XXX series, plugs pin open straight four-row on Board for mounting in holes, pitch 2,0x2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0x2,0 mm

1999 P - 008 G - H15 - XXX
1 2   3 4   5   6

1) Series:
     1999
2) Insulator:
     P: straight
3) number of pins (8...160):
     008: 8 pins
     012: 12 pins
     xxx: ...
     160: 160 pins
4) Contact coverage:
     G: gold plating
     T: tin plating
5) Insulator height in tenths of mm:
     H15: 1,5 mm
6) size C in tenths of mm (standard 82 не указывается):
     XXX

Plugs pin open straight four-row on Board for mounting in holes of this series are made in the form of a comb 4x40 pins. Then they can be cut on a special device on factory at the request of the customer for any even number of contacts: 4, 8, 12... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 2 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout


ID Part.No. number of
contacts
69818 1999P-008G-H15 8
69819 1999P-012G-H15 12
69820 1999P-016G-H15 16
69821 1999P-020G-H15 20
69822 1999P-024G-H15 24
69823 1999P-028G-H15 28
69824 1999P-032G-H15 32
69825 1999P-036G-H15 36
69826 1999P-040G-H15 40
69827 1999P-044G-H15 44
69828 1999P-048G-H15 48
69829 1999P-052G-H15 52
69830 1999P-056G-H15 56
69831 1999P-060G-H15 60
69832 1999P-064G-H15 64
69833 1999P-068G-H15 68
69834 1999P-072G-H15 72
69835 1999P-076G-H15 76
69836 1999P-080G-H15 80
69837 1999P-084G-H15 84
 
ID Part.No. number of
contacts
69838 1999P-088G-H15 88
69839 1999P-092G-H15 92
69840 1999P-096G-H15 96
69841 1999P-100G-H15 100
69842 1999P-104G-H15 104
69843 1999P-108G-H15 108
69844 1999P-112G-H15 112
69845 1999P-116G-H15 116
69846 1999P-120G-H15 120
69847 1999P-124G-H15 124
69848 1999P-128G-H15 128
69849 1999P-132G-H15 132
69850 1999P-136G-H15 136
69851 1999P-140G-H15 140
69852 1999P-144G-H15 144
69853 1999P-148G-H15 148
69854 1999P-152G-H15 152
69855 1999P-156G-H15 156
69856 1999P-160G-H15 160

1999P-XXXG-H15-XXX series, plugs pin open straight four-row on Board for mounting in holes, pitch 2,0x2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0x2,0 mm

PCB layout