Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors
|
|
Connectors >> Board-to-Board connectors, pin headers and sockets >> pitch 2,0x2,0 mm |
2208DI-XXG-XXXX series |
plugs pin open straight double row with double insulator on Board for mounting in holes, pitch 2,0x2,0 mm
|
Drawing
|
2208 |
DI |
- |
04 |
G |
- |
XXXX |
1 |
2 |
|
3 |
4 |
|
5 |
|
1) Series: 2208
2) Insulator: DI: double insulator
3) number of pins (4...80): 04: 4 pin (padded with zeros in front if less than 10 pins, i.e.: 04, ... 08) 04: 4 pins xx: ... 80: 80 pins
4) Contact coverage: G: gold plating T: tin plating
5) size C in tenths of mm: XXXX
|
|
Plugs pin open straight double row with double insulator on Board for mounting in holes of this series are made in the form of a comb 2x40 pins. Then they can be cut on a special device on factory at the request of the customer for any even number of contacts: 2, 4, 6... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine. |
Electric characteristic:
Maximum current: 2 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C
Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating
PCB layout
|
107480 |
2208DI-26G-1750 (2x13) |
26 |
107479 |
2208DI-26G-3750 (2x13) |
26 |
80821 |
2208DI-80G-2220 (2x40) |
80 |
120963 |
2208DI-80G-2550 (2x40) |
80 |
|
PCB layout
|
|
|