2210DI-XXG-XXXX series

open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm

2210DI-XXG-XXXX series, open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0 mm

Drawing

2210	DI	-	01	G	-	1200
1	2		3	4		5

1) Series:
     2210
2) Insulator:
     DI: double insulator
3) number of pins (1...40):
     01: 1 contact (padded with zeros in front if less than 10 pins, i.e.:01, 02...09)
     02: 2 pins
     xx: ...
     40: 40 pins
4) Contact coverage:
     G: gold plating
     CG: selective gold plating
     T: tin plating
5) size D in hundredths of mm (standard 1200 = 12,0 mm):
     XXXX

Open the plug pin straight single row double insulator on the Board for mounting holes of this series are made in the form of a comb 1x40 pins. Then they can be cut on a special device on factory at the request of the customer for any number of contacts: 1, 2, 3... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 2 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout

ID	Part.No.	number of contacts
55964	2210DI-20G-1150	20
51821	2210DI-20G-1380	20

2210DI-XXG-XXXX series, open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0 mm

PCB layout