2210DI-XXG-H15-XXXX series

open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm

2210DI-XXG-H15-XXXX series, open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0 mm

Drawing

2210	DI	-	01	G	-	H15	-	2660
1	2		3	4		5		6

1) Series:
     2210
2) Insulator:
     DI: double insulator
3) number of pins (1...40):
     01: 1 contact (padded with zeros in front if less than 10 pins, i.e.:01, 02...09)
     02: 2 pins
     xx: ...
     40: 40 pins
4) Contact coverage:
     G: gold plating
     CG: selective gold plating
     T: tin plating
5) Insulator height in tenths of mm = 1,5 mm:
     H15
6) size D in hundredths of mm (standard 2660 = 26,6 mm):
     XXXX

Open the plug pin straight single row double insulator on the Board for mounting holes of this series are made in the form of a comb 1x40 pins. Then they can be cut on a special device on factory at the request of the customer for any number of contacts: 1, 2, 3... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 2 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout

ID	Part.No.	number of contacts
82390	2210DI-02G-H15-2660	2
82391	2210DI-03G-H15-2660	3
82392	2210DI-04G-H15-2660	4
82393	2210DI-05G-H15-2660	5
82394	2210DI-06G-H15-2660	6
82395	2210DI-07G-H15-2660	7
82396	2210DI-08G-H15-2660	8
82397	2210DI-09G-H15-2660	9
82398	2210DI-10G-H15-2660	10
82399	2210DI-11G-H15-2660	11
82400	2210DI-12G-H15-2660	12
82401	2210DI-13G-H15-2660	13
82402	2210DI-14G-H15-2660	14
82403	2210DI-15G-H15-2660	15
82404	2210DI-16G-H15-2660	16
82405	2210DI-17G-H15-2660	17
82406	2210DI-18G-H15-2660	18
82407	2210DI-19G-H15-2660	19
82408	2210DI-20G-H15-2660	20
82409	2210DI-21G-H15-2660	21

ID	Part.No.	number of contacts
82410	2210DI-22G-H15-2660	22
82411	2210DI-23G-H15-2660	23
82412	2210DI-24G-H15-2660	24
82413	2210DI-25G-H15-2660	25
82414	2210DI-26G-H15-2660	26
82415	2210DI-27G-H15-2660	27
82416	2210DI-28G-H15-2660	28
82417	2210DI-29G-H15-2660	29
82418	2210DI-30G-H15-2660	30
81976	2210DI-31G-H15-2660	31
82015	2210DI-32G-H15-2660	32
81977	2210DI-33G-H15-2660	33
82016	2210DI-34G-H15-2660	34
81978	2210DI-35G-H15-2660	35
82017	2210DI-36G-H15-2660	36
81979	2210DI-37G-H15-2660	37
82018	2210DI-38G-H15-2660	38
81980	2210DI-39G-H15-2660	39
82019	2210DI-40G-H15-2660	40

2210DI-XXG-H15-XXXX series, open the plug pin straight single row double insulator on the Board for mounting holes, pitch 2,0 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,0 mm

PCB layout