Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 
Connectors >> Board-to-Board connectors, pin headers and sockets >> pitch 2,54x2,54 mm

2215S-XXG-XXXX series

pin headers straight with increased insulator double row on Board for mounting in holes, pitch 2,54x2,54 mm

2215S-XXG-XXXX series, pin headers straight with increased insulator double row on Board for mounting in holes, pitch 2,54x2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54x2,54 mm

Drawing
2215S-XXG-XXXX series, pin headers straight with increased insulator double row on Board for mounting in holes, pitch 2,54x2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54x2,54 mm

2215 S - 02 G - XXXX
1 2   3 4   5

1) series:
     2215
2) insulator:
     S: straight
3) number of pins (3...120):
     02: 2 pins (supplemented with zeros in front, if less than 10 contacts, i.e.: 02, ... 08)
     04: 4 pins
     xx: ...
     80: 80 pins
4) plating:
     G: gilding
     T: tinning
5) size C in hundredths of mm (if not specified, standard 1800 = 18,00 mm)
     XXXX

Pin headers straight with increased insulator double row on Board for mounting in holes of this series are made in the form of a comb 2x40 pins. Then they can be cut on a special device on factory at the request of the customer for any even number of contacts: 2, 4, 6... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 2 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+114°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout


ID Part.No. number of
contacts
68590 2215S-04G-1800 (2x2) 4 (2x2)
68591 2215S-06G-1800 (2x3, JILN-12741203CNG0S180001) 6 (2x3)
68592 2215S-08G-1800 (2x4) 8 (2x4)
68593 2215S-10G-1800 (2x5) 10 (2x5)
68594 2215S-12G-1800 (2x6) 12 (2x6)
68595 2215S-14G-1800 (2x7) 14 (2x7)
80037 2215S-16G-1300 (2x8) 16 (2x8)
68596 2215S-16G-1800 (2x8) 16 (2x8)
68597 2215S-18G-1800 (2x9) 18 (2x9)
68598 2215S-20G-1800 (2x10) 20 (2x10)
17399 2215S-22G-1800 (2x11) 22 (2x11)
68599 2215S-24G-1800 (2x12) 24 (2x12)
17398 2215S-26G-1800 (2x13) 26 (2x13)
68600 2215S-28G-1800 (2x14) 28 (2x14)
68601 2215S-30G-1800 (2x15) 30 (2x15)
68602 2215S-32G-1800 (2x16) 32 (2x16)
17397 2215S-34G-1800 (2x17) 34 (2x17)
68603 2215S-36G-1800 (2x18) 36 (2x18)
68604 2215S-38G-1800 (2x19) 38 (2x19)
68605 2215S-40G-1800 (2x20) 40 (2x20)
68606 2215S-42G-1800 (2x21) 42 (2x21)
68607 2215S-44G-1800 (2x22) 44 (2x22)
68608 2215S-46G-1800 (2x23) 46 (2x23)
68609 2215S-48G-1800 (2x24) 48 (2x24)
68610 2215S-50G-1800 (2x25) 50 (2x25)
68611 2215S-52G-1800 (2x26) 52 (2x26)
68612 2215S-54G-1800 (2x27) 54 (2x27)
68613 2215S-56G-1800 (2x28) 56 (2x28)
68614 2215S-58G-1800 (2x29) 58 (2x29)
68615 2215S-60G-1800 (2x30) 60 (2x30)
68616 2215S-62G-1800 (2x31) 62 (2x31)
68617 2215S-64G-1800 (2x32) 64 (2x32)
68618 2215S-66G-1800 (2x33) 66 (2x33)
68619 2215S-68G-1800 (2x34) 68 (2x34)
68620 2215S-70G-1800 (2x35) 70 (2x35)
68621 2215S-72G-1800 (2x36) 72 (2x36)
68622 2215S-74G-1800 (2x37) 74 (2x37)
68623 2215S-76G-1800 (2x38) 76 (2x38)
68624 2215S-78G-1800 (2x39) 78 (2x39)
68625 2215S-80G-1800 (2x40) 80 (2x40)

2215S-XXG-XXXX series, pin headers straight with increased insulator double row on Board for mounting in holes, pitch 2,54x2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54x2,54 mm

PCB layout