Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 
Connectors >> Board-to-Board connectors, pin headers and sockets >> pitch 2,54 mm

2211SM-XXG-B1-CP series

pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm

2211SM-XXG-B1-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

Drawing
2211SM-XXG-B1-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

2211 SM - 01 G - B1 - XXXX - CP
1 2   3 4   5   6   7

1) series:
     2211
2) insulator:
     SM: for surface mounting
3) number of pins (1...40):
     01: 1 pin (padded with leading zeros if less than 10 pins, i.e.: 01, 02...09)
     02: 2 pins
     xx: ...
     40: 40 pins
4) plating:
     G: gilding
     T: tinning
5) mirroring the location of contacts:
     B1
     B2
6) dimensions A and B in tenths of mm (if not specified, standard 6033 = 6,0 è 3,3 mm):
     XXXX
7) the presence of the cover for the capture of the automatic installation:
     CP

Pin headers on the board for surface (SMD) mounting with a grip of this series are made in the form of a comb 1x40 pins. Then they can be cut on a special device on factory at the request of the customer for any number of contacts: 1, 2, 3... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 1.5 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout


ID Part.No. number of
contacts
84195 2211SM-02G-B1-CP 2
84196 2211SM-03G-B1-CP 3
84197 2211SM-04G-B1-CP 4
84198 2211SM-05G-B1-CP 5
84199 2211SM-06G-B1-CP 6
84200 2211SM-07G-B1-CP 7
84201 2211SM-08G-B1-CP 8
84202 2211SM-09G-B1-CP 9
84203 2211SM-10G-B1-CP 10
84204 2211SM-11G-B1-CP 11
84205 2211SM-12G-B1-CP 12
84206 2211SM-13G-B1-CP 13
84207 2211SM-14G-B1-CP 14
84208 2211SM-15G-B1-CP 15
84209 2211SM-16G-B1-CP 16
84210 2211SM-17G-B1-CP 17
84211 2211SM-18G-B1-CP 18
84212 2211SM-19G-B1-CP 19
84213 2211SM-20G-B1-CP 20
84214 2211SM-21G-B1-CP 21
84215 2211SM-22G-B1-CP 22
84216 2211SM-23G-B1-CP 23
84217 2211SM-24G-B1-CP 24
84218 2211SM-25G-B1-CP 25
84219 2211SM-26G-B1-CP 26
84220 2211SM-27G-B1-CP 27
84221 2211SM-28G-B1-CP 28
84222 2211SM-29G-B1-CP 29
84223 2211SM-30G-B1-CP 30
84224 2211SM-31G-B1-CP 31
84225 2211SM-32G-B1-CP 32
84226 2211SM-33G-B1-CP 33
84227 2211SM-34G-B1-CP 34
84228 2211SM-35G-B1-CP 35
84229 2211SM-36G-B1-CP 36
84230 2211SM-37G-B1-CP 37
84231 2211SM-38G-B1-CP 38
84232 2211SM-39G-B1-CP 39
84233 2211SM-40G-B1-CP 40

2211SM-XXG-B1-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

PCB layout