Bentex
  Company Profile
  Products
  Contact Us

Products:
Battery Holders
Capacitors
Connectors
Gas tubes
Heat Sinks
ICs >> STM32 microcontrollers
LCD Module
LED Display
LED Lens
LED Lights
LED Module
Materials
Miniature Speakers
Plastic & Hardware
Potentiometers & Encoders
Resistors
Power Supplies
Power supply filters
Quartz Crystal
Switches
Test Probes
Thermistors
Varistors

 
Connectors >> Board-to-Board connectors, pin headers and sockets >> pitch 2,54 mm

2211SM-XXG-B2-CP series

pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm

2211SM-XXG-B2-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

Drawing
2211SM-XXG-B2-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

2211SM SM - 01 G - B1 - XXXX - CP
1 2   3 4   5   6   7

1) series:
     2211SM
2) insulator:
     SM: for surface mounting
3) number of pins (1...40):
     01: 1 pin (padded with leading zeros if less than 10 pins, i.e.: 01, 02...09)
     02: 2 pins
     xx: ...
     40: 40 pins
4) plating:
     G: gilding
     T: tinning
5) mirroring the location of contacts:
     B1
     B2
6) dimensions A and B in tenths of mm (if not specified, standard 6033 = 6,0 è 3,3 mm):
     XXXX
7) the presence of the cover for the capture of the automatic installation:
     CP

Pin headers on the board for surface (SMD) mounting with a grip of this series are made in the form of a comb 1x40 pins. Then they can be cut on a special device on factory at the request of the customer for any number of contacts: 1, 2, 3... etc. The cost of cutting only slightly increases the price of a single contact, but the cut is almost perfect, without chipping at the ends, and the customer does not spend time on the work, which is easily done by the machine.

Electric characteristic:
Maximum current: 1.5 A AC/DC
Maximum voltage: 250 V AC/DC
Electric characteristic: 20 mOhm (max.)
Insulation resistance: 1000 MOhm (min.)
Dielectric strength: 500 V AC for 1 min.
Operating temperature: -40...+105°C

Insulator material: high temperature plastic (UL94V-0)
Contact material: phosphor bronze
Standard contact coverage: gold plating

PCB layout


ID Part.No. number of
contacts
84235 2211SM-02G-B2-CP 2
84236 2211SM-03G-B2-CP 3
84237 2211SM-04G-B2-CP 4
84238 2211SM-05G-B2-CP 5
84239 2211SM-06G-B2-CP 6
84240 2211SM-07G-B2-CP 7
84241 2211SM-08G-B2-CP 8
84242 2211SM-09G-B2-CP 9
84243 2211SM-10G-B2-CP 10
84244 2211SM-11G-B2-CP 11
84245 2211SM-12G-B2-CP 12
84246 2211SM-13G-B2-CP 13
84247 2211SM-14G-B2-CP 14
84248 2211SM-15G-B2-CP 15
84249 2211SM-16G-B2-CP 16
84250 2211SM-17G-B2-CP 17
84251 2211SM-18G-B2-CP 18
84252 2211SM-19G-B2-CP 19
84253 2211SM-20G-B2-CP 20
84254 2211SM-21G-B2-CP 21
84255 2211SM-22G-B2-CP 22
84256 2211SM-23G-B2-CP 23
84257 2211SM-24G-B2-CP 24
84258 2211SM-25G-B2-CP 25
84259 2211SM-26G-B2-CP 26
84260 2211SM-27G-B2-CP 27
84261 2211SM-28G-B2-CP 28
84262 2211SM-29G-B2-CP 29
84263 2211SM-30G-B2-CP 30
84264 2211SM-31G-B2-CP 31
84265 2211SM-32G-B2-CP 32
84266 2211SM-33G-B2-CP 33
84267 2211SM-34G-B2-CP 34
84268 2211SM-35G-B2-CP 35
84269 2211SM-36G-B2-CP 36
84270 2211SM-37G-B2-CP 37
84271 2211SM-38G-B2-CP 38
84272 2211SM-39G-B2-CP 39
84273 2211SM-40G-B2-CP 40

2211SM-XXG-B2-CP series, pin headers on the board for surface (SMD) mounting with a grip, pitch 2,54 mm, Board-to-Board connectors, pin headers and sockets > pitch 2,54 mm

PCB layout